●About installation
When installing, disassembling, wiring and maintaining the rocker switch (rocker switch), be sure to perform the power OFF state. Otherwise, it may cause electric shock or burns.


●About wiring work
• Do not perform wiring work when the rocker switch (rocker switch) is energized. In addition, please do not touch the live parts of the terminals when the power is on. Otherwise, it may cause electric shock.
• For wiring work and soldering work, perform wiring according to [Correct Usage]. If the wiring or soldering is poor, it may be burnt due to abnormal heat generation during power-on.


●About contact load
Please select the appropriate rocker switch (rocker switch) rating according to the contact load. If a current exceeding the load of the contact is applied to the contact, it will cause welding and movement of the contact, which may cause short circuit and burnout.


●About the type of load
Depending on the type of load, the constant current and inrush current may be quite different as shown in the figure below. Please select the appropriate rated rocker switch (rocker switch) according to the load type. The greater the surge current when the circuit is closed, the greater the consumption and movement of the contact, which will cause the welding and movement of the contact, and may cause a short circuit or burn.